Wooden Mojura Fans V1.0


Handmade wooden practice fans designed and manufactured by Flow DNA right here in South Africa.




Flow DNA is very proud to present to you: Mojura Fans!  Handmade wooden practice fans designed and manufactured right here in South Africa.

Mojura Fans were created from the ground up not just to look good, but ergonomically to feel good in your hands however you hold them (not just on the handles).  They are shaped to stimulate persistence of vision effects in motion, and rounded off for the comfort of holding them, with a slightly bubbly feel to touch.  With a finishing process designed by a professional luthier, you can feel the smooth grain of the wood slide inside your hands.

Available in small and medium sizes of either 2-finger tech grip, or 4-finger hybrid grip.

Choosing a grip style:

2-finger Tech Grips:
If you like to perform box-techy manipulations that involve more jerky movements where you need to stall the fans at specific angles, then a tech grip might work better for you. The angular shape of the tech grips help with stopping at increments of 45 degrees.

4-finger Hybrid Grips:
If you prefer to spin your Mojura fans in a continuous flow, performing lots of weaves and fountains, or if you want to do a lot of tosses with your fans, then the 4-finger grip is more suited to your style. The larger ring allows for wilder spinning movements than a tech grip, and is easier to catch in the air, while the wide outer ring allows for easier stalls and box-tech manipulations than a Russian grip.

Choosing a size:

This depends on grip style, finger/hand size, arm length, and personal preference.

2-finger tech grips – Measure your middle and ring fingers together at the middle knuckles. If they are larger than 37mm (1.45 inch), then you’ll need the medium size. Larger than 42mm (1.65 inch) and you might need a 4-finger grip, or contact us about a larger tech grip option.

4-finger hybrid grips – Measure the width of your 4 fingers at the middle knuckles. If you measure wider than 72mm (2.83″), then the small size won’t fit easily, and you’ll need the medium size. If larger than 82mm (3.23″), or if you prefer a more spacious Russian grip, please contact us about a larger option.

Arm length – The small and medium fans also have different total length and width. If you’re a small person, or you like to do a lot of tech inside your arms, then you might prefer the smaller sizes, so the fans can fit in the space between your hands and elbows.

* While this aviation-grade birch plywood will not break unless you try really hard, we do not recommend juggling on harsh surfaces like bricks and concrete, as the drops will cause marks on the edges of your fans.


  • Balanced and shaped for box-tech manipulation, fishtails, gunslingers, spinning, and juggling*.
  • Centre-of-mass marked out with a logo.
  • Side balance points visibly indicated.
  • They feel great for layering 2-fans-1-hand techniques.
  • Additional grips on the sides for extra techy movement opportunities.
  • Comfortable to hold at any point along the edges, as well as the inside of the fans.
  • Made from highly durable birch plywood.
  • Finished with bio-friendly shellac, like a luthier-crafted custom guitar.

Tech Specs:

  • Material: Birch plywood
  • Thickness: 9.5mm (0.375″)
  • 2-finger tech – Small:
    Grip ring size: 37mm (1.45″)
    Length: 324mm (12.75″)
    Width: 454mm (17.87″)
    Weight: 205g (7.23oz) per fan
  • 2-finger tech – Medium:
    Grip ring size: 42mm (1.65″)
    Length: 356mm (14″)
    Width: 500mm (19.68″)
    Weight: 245g (8.64oz) per fan
  • 4-finger hybrid – Small:
    Grip ring size: 72mm (2.83″)
    Length: 330mm (13″)
    Width: 454mm (17.87″)
    Weight: 205g (7.23oz) per fan
  • 4-finger hybrid – Medium:
    Grip ring size: 82mm (3.23″)
    Length: 364mm (14.33″)
    Width: 500mm (19.68″)
    Weight: 245g (8.64oz) per fan